Non-Nuclear Asphalt Density Gauge, Touch Screen, New Model
OPERATIONAL FEATURES:
Status Bar: Displays GPS status, Data Save status, battery voltage, low battery and date and time
Storage: Built-in 512M memory, stores up to 40000 project measurement points with details, and up to 200 models
Data Logging: When enabled, stores all measurements taken in single or average modes (Status Bar Icon)
Reports: Easily download data to be imported into Excel
GPS Control: When activated will display latitude and longitude positions, number of satellites the gauge is connected to as well as the UTC date and time, also available in UTM format. GPS information will store with each measurement when Data Save and GPS feature is enabled (Status Bar Icon)
Update Software: One touch upload of new software using a USB memory stick
Data Management: Quickly Access, download or delete your project data
Set Time & Date: Quick time and date setup, MM/DD/YY and DD/MM/YY formats
Units: Interchangeable settings for Density (kg/m3, lb/ft3), Temp (°C, °F), Depth (in, mm) and Stone Size (in, mm)
Calculator: Built in four function calculator
Enhanced Customer Support: Diagnostic screen to aid in factory Support
User Programmable Target Density: Used for calculating % compaction
GENERAL FEATURES:
MODES
Single: Reading time less than five (5) seconds. Stores Data.
Average: Averages five (5) readings and stores data including date and time.
Continuous: Instantaneous density readings.
FUNCTIONS
Density: % Compaction, % Porosity
Integrated Temperature Sensing: Real time temperature display 0 °C to 350 °C
CALIBRATION MODES
Normal: Correlation offset to cores.
MEASUREMENT SPECIFICATIONS:
Sensing Area: 260mm diameter base allows optimum measurement on fine and coarse material types.
Measurement Depth: 300 mm
Measurement Display: Density, % Compaction, Surface Temperature, Mix Name & Project Name
ELECTRICAL SPECIFICATIONS:
Microprocessor Controlled
Battery: 13200mAh ternary lithium battery
Recharge Life: >15h
Battery charger: DC5V 2A
Computer Ports: 1 USB Port
Status Bar: Displays GPS status, Data Save status, battery voltage, low battery and date and time
Storage: Built-in 512M memory, stores up to 40000 project measurement points with details, and up to 200 models
Data Logging: When enabled, stores all measurements taken in single or average modes (Status Bar Icon)
Reports: Easily download data to be imported into Excel
GPS Control: When activated will display latitude and longitude positions, number of satellites the gauge is connected to as well as the UTC date and time, also available in UTM format. GPS information will store with each measurement when Data Save and GPS feature is enabled (Status Bar Icon)
Update Software: One touch upload of new software using a USB memory stick
Data Management: Quickly Access, download or delete your project data
Set Time & Date: Quick time and date setup, MM/DD/YY and DD/MM/YY formats
Units: Interchangeable settings for Density (kg/m3, lb/ft3), Temp (°C, °F), Depth (in, mm) and Stone Size (in, mm)
Calculator: Built in four function calculator
Enhanced Customer Support: Diagnostic screen to aid in factory Support
User Programmable Target Density: Used for calculating % compaction
GENERAL FEATURES:
- 7.0 in full color graphics driven user interface, touch screen operation, easy to use.
- New status bar feature, displays GPS status, data save status, available battery voltage, low battery status and date and time
- New data management feature, quickly access, download or delete your project data
- Ability to download files from the device via USB drive
- Fast, reliable, accurate material density and compaction test, and repeatable readings in real time, user friendly, cost effective
- Non-Nuclear means no badges, licenses or storage and transport concerns
MODES
Single: Reading time less than five (5) seconds. Stores Data.
Average: Averages five (5) readings and stores data including date and time.
Continuous: Instantaneous density readings.
FUNCTIONS
Density: % Compaction, % Porosity
Integrated Temperature Sensing: Real time temperature display 0 °C to 350 °C
CALIBRATION MODES
Normal: Correlation offset to cores.
MEASUREMENT SPECIFICATIONS:
Sensing Area: 260mm diameter base allows optimum measurement on fine and coarse material types.
Measurement Depth: 300 mm
Measurement Display: Density, % Compaction, Surface Temperature, Mix Name & Project Name
ELECTRICAL SPECIFICATIONS:
Microprocessor Controlled
Battery: 13200mAh ternary lithium battery
Recharge Life: >15h
Battery charger: DC5V 2A
Computer Ports: 1 USB Port
ASTM D 7113-05, AASHTO T 343-12
